The Ten Best Ak Scope Mount

1.PK-01 VS. Red Dot Sight. Rifle Scope Collimator for Saiga. Co-Witness. 1 MOA. Original by BelOMO. Combloc

About this item

• Low profile, co-witness Red Rot Scope with large viewfield.
• Red Dot sight with build in Russian Side Rail mount.
• Filled with dry nitrogen to avoid weeping of optics due to temperature differences
• Discrete brightness adjustment of the aiming mark can be carried out manually by means of 8-position switch
• Temperature range from -4 °F to +122 °F

Brand

BelOMO

2.0Monstrum Tactical Scope Ring Set for Picatinny/Weaver Rails | 1 inch Diameter

About this item

• 1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes
• Mounts to any flat top Picatinny or Weaver rail equipped rifle
• High profile in height, 0.185 inches from base of mount to bottom of rings
• Light weight 6061 aerospace aluminum construction
• All Monstrum Tactical mount and accessory products come with a lifetime guarantee

 

3.Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

About this item

• Double scope ring mount for Picatinny/ Weaver Rail (21mm).
• Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
• Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
• The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch)
• With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily.

 

4.BESTSIGHT Scope Mount Cantilever Picatinny Mount 30mm &1 inch Cantilever Scope Mount for 30mm Scope Mount& 1 inch Scope Mount

About this item

• 30mm scope mount with extra rings suitable for 1 inch scope mount ,20mm picatinny weaver rails
• [More Stable]Use of 6 screws in total is more stable and secure than 2 screws on standard mounts
• Mounts to any flat top Picatinny rail 20mm mount rifle
• [Suitable for High Recoil]Hold up under heavy recoil sustained fire in the most extreme shooting circumstances.
• Defect: Whether it is installed or disassembled scope sight, you need to remove 12 screws

Brand

BESTSIGHT

5.CVLIFE 2.5-10x40e Red & Green Illuminated Scope with 20mm Mount

About this item

• Magnification: 2.5-10X with 40mm objective ; Field of View:100 yards of 32.5′ @ 2.5x – 8.9′ @10x; Laser: 2mW, Class IIIA, reaching 100 yards
• Clearer Image: multi-coated green lens boast much higher light transmittance compared with blue lens
• Illumination Modes: red & green (5 intensity)
• Durable: made of high strength aircraft aluminum
• If you want to install in any 3/8″ Dovetail / 11mm Dovetail Rail, Please Search and Buy ” CVLIFE 11mm Mount “

 

Brand

CVLIFE

 

6.Pinty Rifle Scope 3-9×32 Rangefinder Illuminated Reflex Sight 4 Reticle Green Dot Laser Sight

About this item

• 4 in 1, comes with a rangefinder riflescope, a green laser sight and a red/green dot sight everything you will ever need.
• Magnifications from 3X up to 9X, green/red illuminations with 5 brightness adjustments for both the riflescope and electronic unlimited brightness control for the dot sight, 4 reticle patterns also available for the red/green dot sight.
• Red/green dot reflex sight with bottom switch – highly accurate optic and substitute for overpriced holographic clear, high resolution image unlimited eye relief and wide field of view.
• Picatinny mount easily mountable to any 22mm rails; Multi-coated optics with O-ring sealing and nitrogen filling ensures 100% water and fog-proof.
• Unsurpassed light transmission, uncompromising mechanical performance and clarity.

 

Brand

Pinty

 

7.Monstrum Tactical 1″ Offset Picatinny Rail Mount for Flashlights

About this item

• Offset rail mount for mounting flashlights to rail equipped rifles or shotguns
• Mounts to any standard Picatinny 1913 rail, with the flashlight offset to the side
• Mount is 1″ in diameter, 1.8″ in length, 1.6″ in height, and 1.6 ounces in weight
• Crafted from high quality, lightweight aluminum

 

8.CVLIFE Hunting Rifle Scope 6-24×50 AOE Red and Green Illuminated Gun Scope with Free Mount

About this item

• Magnification: 6-24x
• Objective Diameter: 50mm
• Field Of View: 28 ft @ 100 yards
• Click Value: 1/8 inch @ 100 yards
• Illuminated Type of the rifle scope: Red and Green

 

Brand

CVLIFE

 

9.Pinty 2.5-10×40 Red Green Illuminated Mil-dot Tactical Rifle Scope with Red Laser Combo – Green Lens Color

About this item

• FIELD OF VIEW: Magnification 2.5-10X with 40mm objective, field Of View: 100 yards of 32.5′ @ 2.5x – 8.9′ @10x, laser range up to 100 yards.
• MULTI-COATED GREEN OBJECTIVE LENS, boast higher light transmittance for better clarity performance compared to blue objective lens.
• RED AND GREEN ILLUMINATED RETICLE, 5 brightness levels for all environments.
• A QUALITY COMPLET SET OF LASER SCOPE, Solid aluminum alloy construction, quick and secure attachment to all Picatinny or Weaver rails.
• WATERPROOF, FOG PROOF PERFORMANCE, Nitrogen filled and O-ring sealed for waterproof, fog proof performance.

 

Brand

Pinty

 

10.Sig Sauer SOR52001 Romeo5 1x20mm Compact 2 Moa Red Dot Sight, Black

About this item

• 100% Other Fibers
• Made in the USA or Imported
• 2 MOA Red-Dot provides 10 illumination settings (8 daylight plus 2 NV) for visibility in all light conditions
• MOTAC (Motion Activated Illumination) powers up when it senses motion and powers down when it does not. Provides for optimum operational safety and enhanced 40,000+ hour battery life
• Integrated M1913 Picatinny interface provides industry-standard mounting options for a wide range of applications
• Dependable waterproof (IPX-7 rated for complete water immersion up to 1 meter) and fog-proof performance
• Includes a M1913 Picatinny low mount riser and a co-witness 1.41in riser mount

 

Brand

Sig Sauer